|
Post by Nick on Mar 15, 2012 19:13:13 GMT
both OS front wheel cylinders, managed to break one.. seriously.. was winding the hose in , all seemed fine suddenly the hose has a big collar of cast iron attatched to it and the wheel cylinder is somewhat slimmer..
and the other one I cant get a blled nipple for for love nor money as its some old weird thread and not 10-1mm like the other 5 cylinders have been, dunnily enough it was also the one hardest to clean up so presume tis original
|
|
|
Post by 33grinder on Mar 15, 2012 19:46:29 GMT
I think we might have some Nick. Can you post a photo so we can compare?
|
|
|
Post by Nick on Mar 15, 2012 22:09:41 GMT
Ill bring them home tomrrow, and photograph them, annoyed as hell, bet its my fault I broke the other one
|
|
|
Post by 33grinder on Mar 15, 2012 22:47:26 GMT
Am I right in thinking that they don't look like regular cylinders Nick? They are flat with a curved end and two of them per drum?
|
|
|
Post by Nick on Mar 15, 2012 22:55:03 GMT
two per drum and they have a groove in the bottom for the shoe it isnt pushing to locate in, thing is I noticed nearside and offside are mirrors of each other due to where the top fixing hole is on them...
|
|
|
Post by Nick on Mar 15, 2012 22:57:49 GMT
just borrowed this off daf hobby .nl see how the hole is offset on one end? I will have to look at mine to confirm this is the right one.. Attachments:
|
|
|
Post by Nick on Mar 15, 2012 22:59:12 GMT
whereas this one is the other way round Attachments:
|
|
|
Post by 33grinder on Mar 15, 2012 23:47:57 GMT
OK Nick, is it a pair you need or just the one. Am planning on seeing Matt tomorrow so if you can let me know asap can have a look for you.
|
|
|
Post by macplaxton on Mar 16, 2012 0:53:23 GMT
You might find someone has been "at it" in the past. I think they all should be M10x1 threaded, but being Girling someone may have plonked similar looking cylinders with Imperial threads in on that side. While you're at it check the piston sizes as a Sir Mix-A-Lot set won't haul up straight...
|
|
|
Post by Nick on Mar 16, 2012 7:22:11 GMT
hi RIch, yeah all apart from the front cylinder on the OS were indeed m10-1 thread. god knows what that one was, 3/8 or something I expect.. Pete, yes its both for that side that I need, if you know for sure you have OS ones then cool but ill try and photograph mine today if my phone will play ball
|
|