|
Post by mattsdafs on Jan 20, 2020 19:57:57 GMT
Been offered a 66 saloon as a doner..
Smashed glass and rotten body..but has all mechanical items including a 1300 engine..
Once collected,an attempt to start will confirm the condition of the mechanicals..
|
|
|
Post by johnsaab on Jan 21, 2020 16:39:45 GMT
Been offered a 66 saloon as a doner.. Smashed glass and rotten body..but has all mechanical items including a 1300 engine.. Once collected,an attempt to start will confirm the condition of the mechanicals.. What colour is it?
|
|
|
Post by mattsdafs on Jan 22, 2020 13:26:29 GMT
No idea John but the body is bad..
What are you after and in what colour?
|
|
|
Post by starider on Feb 9, 2020 22:07:58 GMT
Hi Matt,
I've been thinking, I need quite a few spares for this van, have you got a complete, approx.1972 Daf 33 Saloon which is not restorable, which you want to move on.It's mainly interior trim,door handles,rubber mats,wiring etc.I need, but I keep finding "bits" that need replacing. If you want to hold onto what you have I understand,I'll keep a lookout for one.
Tony.
|
|
|
Post by mattsdafs on Feb 10, 2020 23:16:49 GMT
Hi Tony..
It just so happens I do have a 33 that might be of use to you..the only issue is..it's in Wakefield😕
Failing this,I look forward to your list..😁
|
|
|
Post by starider on Feb 12, 2020 23:37:20 GMT
Hi Matt,
Thanks for that, I'll keep my eyes open, something will appear. I'll look tomorrow and see what I need, I'll compile a list, but I'm sure I'll miss something.Will send PM.Do you know how many vans are in the UK? I found some pics. from way back in around 20?? and it looked pretty rotten,is it being restored? I have re-panelled one window opening and almost finished the other side, so it's almost back to how it left the factory. Still quite a bit of welding and fabricating to do, but will rub down infill panels,give a couple of coats of primer and then take out the engine, before starting bodywork in earnest.The doors need the bottoms rebuilding and several patches welding in areas of the body.The offside inner, upper wing support needs replacing,but as the wing top is badly corroded I'll cut out the bad section to allow access to the inner then weld in a new top section. All good fun!!..............Tony
|
|
|
Post by mattsdafs on Feb 13, 2020 0:32:36 GMT
Hi Tony..
It sounds like you have a few more days with the welder..good luck with it..
Will help with what ever I can supply,if any large items are needed then we will need to think about collection/delivery..
As for 33 vans..I think there are 2 more..plus a couple of pick ups..1 I know is a converted from a car.. Don't forget Pete has a 33 van..in blue..
|
|