|
Post by ozzie on Jan 27, 2014 9:38:45 GMT
Hay guess what I think I have found a ready supply of washer buttons can you measure for me the diameter inside the retaining bezel on the original as I have not got one and can any one donate one to the cause of washer buttons for all.
I REMEMBERED MY OLD FIATS 500 , 127 and 126 they had them and they are available easily and from about £ 5 each has any one tried these.
|
|
|
Post by 33grinder on Jan 27, 2014 13:15:47 GMT
I don't think anyone has Ozzie, so far as I know. What I can tell you is that the DAF items were made by VDO and are shared with the Porsche 904 (not that that is any good to anyone..).
If any out there in DAF land can offer up the required measurement for Ozzie that would be superb.
|
|
|
Post by ozzie on Jan 28, 2014 7:29:02 GMT
I have ordered 2 different ones I plastic and one metal surround only problem is I have not seen one or got the retaining screw thingy bit to hold the switch part in the dash. Can Anyone help with that
|
|
|
Post by ozzie on Jan 29, 2014 22:04:40 GMT
Well here we go they arrived via mr posti today I think something might be able to be made up from from these. Can ay one show me what the original looks like or again does any one have a fubared on or the retaining ring for one going spare.
|
|
|
Post by 33grinder on Jan 29, 2014 22:40:52 GMT
We'll have fubared ones I think Ozzy. Just a case of waiting for Matt to go to the barn at the weekend.
|
|
|
Post by ozzie on Jan 30, 2014 21:04:07 GMT
Yipppeeee. I hope so I have found out the original ones are ribbed these aren't so won't look right but I am sure I can get them to work easily it's just will they fit in the retaining ring or will I have to get a mate with a lathe to knock up a new on or an insert or something.
Looking forward to getting on it but alas my digger bits arrived from Japan so I will be getting side lined as the shed needs building so the digger 3 cylinder needs putting back together well at least it has rubber bands that drive it i.e. the tracks he he he
|
|