|
Post by swissdave on Mar 16, 2014 19:24:24 GMT
Whilst trawling the internet researching everything Daf I found the pic below which states that the thread of the wheel studs and therefore nuts is M 14 x 1. Does anyone know if this is correct as it's very unusual? M14 x 1.5 seems the norm for inferior brands. ;-) Regards, Steve.
|
|
|
Post by macplaxton on Mar 16, 2014 19:38:36 GMT
That'll be my scan from the workshop manual Yes, they are very fine and yes, they are 1mm pitch.
|
|
|
Post by swissdave on Mar 16, 2014 20:10:12 GMT
Thanks, I knew you'd know!
|
|
|
Post by macplaxton on Mar 16, 2014 20:12:04 GMT
I know it's not fun, but you could of saved all the "trawling the internet researching everything Daf" and just asked! Now to answer the next question...22mm wheel nut covers (that's for a DAF 66, Volvo might be different) ETA: V300s had 19mm nut covers in both silver and black.
|
|
|
Post by macplaxton on Mar 16, 2014 20:17:30 GMT
Or is it 21mm for a D66? You've got me doubting myself now!
|
|
|
Post by Sigmund Fraud on Mar 17, 2014 9:23:35 GMT
M14 means a 22mm wrench, so 22mm covers ?
|
|
|
Post by macplaxton on Mar 17, 2014 16:28:38 GMT
As I don't have a hub here, it might be, but then these are super fine thread wheel nuts and something is nagging at me with the 21mm hex. Someone go and measure please!
|
|
|
Post by pauldaf44 on Mar 17, 2014 18:24:23 GMT
As I don't have a hub here, it might be, but then these are super fine thread wheel nuts and something is nagging at me with the 21mm hex. Someone go and measure please! They are 22mm hex
|
|
|
Post by macplaxton on Mar 17, 2014 19:13:59 GMT
Thanks, I'll sleep easier tonight!
|
|