Introduction and Apology

plasticpig
New Member

Posts: 4

Introduction and Apology Aug 6, 2020 12:22:38 GMT

Quote

Post by plasticpig on Aug 6, 2020 12:22:38 GMT

Hi All.

I have just joined this forum after Matt pointed it out to me.

I have a Daf 66 engine which I would like to use in a trike, and am after some bits to convert it from solid flywheel and cage/pully to clutch and bell housing.

Depending on what parts turn up, it will be either a simple Reliant gearbox and axle, or two VW type 1 swingaxle trans, as in the attached picture.

I hope this will not upset too many members, but in my defence I have not scrapped a complete car.

Thanks. Doug

mattsdafs
Moderator

8 Dafs..

Posts: 1,007

Introduction and Apology Aug 6, 2020 12:48:43 GMT

Quote

Post by mattsdafs on Aug 6, 2020 12:48:43 GMT

Welcome to the forum Doug..

Thanks for joining and please keep us updated on the build..it will be of interest..

I will sort the 66 bell housing for you on Saturday but did spot you said you have a 66 engine,it's a 55 engine you have..😉

Regards
Matt.

Put the kettle on..more tea needed.
Can I buy another Daf yet..?..

plasticpig New Member Posts: 4	Introduction and Apology Aug 6, 2020 15:46:49 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by plasticpig on Aug 6, 2020 15:46:49 GMT Sorry, my mistake.

Tuning Data
Model	Plugs gap	Points gap	Timing	In. valve	Ex. valve	Idle
33-> Jul'71	0.8mm	0.5mm	6 BTDC	0.1mm	0.15mm	725
33 Jul'71->	0.8mm	0.5mm	5 ATDC	0.1mm	0.15mm	900
44-> Jul'71	0.8mm	0.5mm	6 BTDC	0.1mm	0.15mm	725
44 Jul'71->	0.8mm	0.5mm	5 ATDC	0.1mm	0.15mm	900
55	0.6mm	0.5mm	TDC	0.15mm	0.20mm	700
55 Marathon	0.7mm	0.5mm	TDC	0.15mm	0.20mm	700
66 all 1108cc	0.7mm	0.5mm	TDC	0.15mm	0.20mm	725
66 1289cc	0.7mm	0.5mm	6 BTDC	0.15mm	0.20mm	725

Title 1
Here is the text content that you want to add. Here is the text content that you want to add. Here is the text content that you want to add. Here is the text content that you want to add. Here is the text content that you want to add. Here is the text content that you want to add.
Title 2
And here is some more text content. And here is some more text content. And here is some more text content. And here is some more text content. And here is some more text content. And here is some more text content. And here is some more text content.
Title 3
And here is some more text content. And here is some more text content. And here is some more text content. And here is some more text content. And here is some more text content. And here is some more text content. And here is some more text content.

Title 1

Here is the text content that you want to add. Here is the text content that you want to add. Here is the text content that you want to add. Here is the text content that you want to add. Here is the text content that you want to add. Here is the text content that you want to add.

Title 2

And here is some more text content. And here is some more text content. And here is some more text content. And here is some more text content. And here is some more text content. And here is some more text content. And here is some more text content.

Title 3

Introduction and Apology

Post by plasticpig on Aug 6, 2020 12:22:38 GMT

Post by mattsdafs on Aug 6, 2020 12:48:43 GMT

Post by plasticpig on Aug 6, 2020 15:46:49 GMT