|
Post by jayvee1980 on May 29, 2020 11:48:24 GMT
Hi all.
So, I sorted the steering rack and then noticed all the brake fluid had disappeared. Looks like it’s all run inside from a leaky master cylinder.
I have changed that, but I cannot get the brakes to bleed. Pumping the pedal isn’t bringing any fluid out, so I took it apart and cleaned it and all the seals looked fine. Was all quite tight when I put it back together, but still nothing. I get a puff off air from it, but no fluid.
helllllllp!! I just want it to work 😂😂
|
|
andrewthe33
Bigger Belter
I don't know what you've done to me, sir, but you've done me the power of good!
Posts: 158
|
Post by andrewthe33 on May 29, 2020 12:01:15 GMT
If ALL the fluid's drained out of the system it'll take a fair amount of pumping to push the new fluid through. I use one of those pipes with a split in it, with the other and fitted to the bleed nipple and the split end immersed in fresh fluid. It's a slow process, but eventually the bubbles stop!
|
|