|
Post by Bsndaboy on Apr 5, 2020 6:51:21 GMT
Hi.....I received conformation from my Dutch friend overnight that the basic shape of the seats both front and rear is pretty much identical but I may have to play around with the runners/fixings.
|
|
|
Post by mattsdafs on Apr 5, 2020 13:39:46 GMT
That's good news Banda..just a waiting game now until you can collect..
|
|
|
Post by starider on Apr 5, 2020 16:01:48 GMT
Hi, I'm sure everyone knows,but in case it's slipped your minds.If your DAF's are standing with little or no use,chock the wheels and leave the handbrake off.It's also a good move to move the car backwards and forwards a few feet every now and again and then park in a slightly different place so that the belts are on a different area of the discs.This should help prevent corrosion of the discs.....starider
|
|
|
Post by mattsdafs on Apr 5, 2020 20:51:24 GMT
Some good advice Tony..I suppose we couldn't get away with saying..taking the Daf out for exercise 😁..if we were stopped..
|
|
|
Post by starider on Apr 5, 2020 23:12:15 GMT
Hi, the answer is use your DAF for shopping for essentials, one has to eat....Tony.
|
|
|
Post by Julian on Dec 17, 2021 11:07:06 GMT
I am assembling a DAF 44 engine, which will be fitted onto an old aeroplane. I was wondering if you sell, or advice where I could buy an inlet valve, the copper "O" rings for the inlet manifold and the cylinder head valve guide / seal? It appears to be a rubber seal between the valve stem and the cylinder head. Look forward to hearing from you. Just in case, my email is julianaubert@hotmail.com Thanks in advance, Julian
|
|
|
Post by peewee on Dec 17, 2021 20:23:20 GMT
I am assembling a DAF 44 engine, which will be fitted onto an old aeroplane. I was wondering if you sell, or advice where I could buy an inlet valve, the copper "O" rings for the inlet manifold and the cylinder head valve guide / seal? It appears to be a rubber seal between the valve stem and the cylinder head. Look forward to hearing from you. Just in case, my email is julianaubert@hotmail.com Thanks in advance, Julian
|
|
|
Post by peewee on Dec 17, 2021 20:32:12 GMT
Hello Julian, firstly try Graham at Daf classics up in Peterborough,Dafhobby in Sittard, Netherlands, or indeed Matt at Essexdafs. One of these guys should help with your parts requirements. May I say that the aircraft you have built is a credit to you, as seen on the TV at the Brookland Museum.😊
|
|